Model: ALP2101 (Intelligent intrinsically safe positioner 4-20mA control with 4-20mA feedback)

one. The main technical parameters

1. Input signal range: 4～20mA; split range 4～12mA, 12～20mA.

2. Range of feedback signal: 4～20mA; split range 4～12mA, 12～20mA.

3. Equivalent resistance: 425Ω (625Ω; HART protocol type)

4. Control precision: 0.5%

5. Linearity: 1%

6. Sensitivity: self-adaptive; or artificially set during this period from 0. 1% to 5%

7. Air supply pressure range: 0.14～0.55MPa

8. Air consumption: static air consumption ≤50NL/h; dynamic non-assessment

9. Environmental conditions: temperature -25～+60℃; humidity ≤90%

10. Vibration resistance: ≤2g (5～200HZ)

11. Intrinsic safety parameters: Ui = 28VDC; Ii = 93 mA; Pi = 0.65W; Ci = 1nF; Li = 0.2mH;

12. Storage conditions: temperature -40～+85℃; humidity ≤95%

13. Protection level: IP65

two. Programmable parameters

1. Input starting point range: 4～12mA

2. Input end point range: 12～20mA

3. Input signal: direction can be changed

4. Output signal: direction can be changed

5. Shut-off limit: starting point 0～10% end point 90%～110%

6. Travel adjustment: starting point 0～30% end point 70%～100%

7. Travel time: 0～200S

8. Output characteristics: linear, 1:25, 1:50 optional

9. Tolerance band: 0.1%～10% adjustable

10. PID parameters: adjustable

3. The security parameters are as follows:

Input circuit (terminal ± IN)

Ui = 28V, li = 93mA

Pi = 0.66W, Ci = 1 nF, Li = 0.2 mH

Output circuit (terminal ± OUT)

Ui = 28V, li = 93 mA

Pi = 0.66W, Ci = 1nF, Li = 0.2 mH

The connection between this product and the intrinsically safe end of the safety barrier should be a shielded cable with a cross-section> 0.5mm2, and the shielding layer must be grounded. The distributed capacitance and inductance of the cable must be less than the safe value. The safety barrier is installed in a safe place, and its installation and use must comply with the safety barrier instruction manual. The user is not allowed to change the electrical components in the product at will.